Hardware parts - [CNC precision parts] processing

For hardware parts, CNC precision processing, Suzhou Quanxu precision machinery technology is selected. It adopts high-quality materials, advanced design, exquisite workmanship, good quality and reasonable price. The manufacturer sells directly and continuously meets the requirements of customers. Welcome to inquire.

1. Before the machine works, check whether the moving part is filled with lubricating oil, then start and check whether the clutch and brake are normal, and idle the machine tool for 1-3 minutes. It is strictly prohibited to operate in case of mechanical failure.

2. Keep correct posture at work and have sufficient spirit to deal with the work. If you find physical discomfort, you should leave the job immediately and report to the leader. During operation, the operator must concentrate, no chatting and cooperate with each other. The operator must not operate under the state of irritability and fatigue, so as to avoid accidents and ensure operation safety. All employees shall check whether their clothes meet the work requirements before entering the work post. Slippers, high heels and clothes affecting safety are not allowed. Those with long hair should wear safety helmets.

3. When replacing the mold, first turn off the power supply and stop the operation of the movement Department of the punch before starting the installation and commissioning of the mold. After installation and adjustment, move the flywheel by hand for trial punching twice, and check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder ring is in a reasonable position.

4. Only after all other personnel leave the mechanical working area and take away the sundries on the workbench can the power supply be started.

5. During mechanical operation, it is forbidden to extend your hand into the slider working area, and it is forbidden to take and place the workpiece by hand. Standard tools must be used when taking and placing workpieces in the die. In case of abnormal sound or machine failure, turn off the power switch immediately for inspection. After the machine is started, one person shall transport materials and operate the machine. Others shall not press the electric construction or step on the foot switch board, nor put their hands into the mechanical working area or touch the moving part of the machine with their hands.

6. When off duty, the power supply shall be turned off, and the finished products, leftover materials and sundries on the post shall be sorted out to ensure the cleanness and safety of the working environment.